https://www.p2power.co.in Latest Products Sat, 11 Jul 2026 09:06:05 +0530 en-us https://www.p2power.co.in https://www.p2power.co.in/power-quality-solution-products.htm https://www.p2power.co.in/power-quality-solution-products.htm Fri, 20 Mar 2020 00:00:00 +0530 https://www.p2power.co.in/voltage-regulation-solution-products.htm https://www.p2power.co.in/voltage-regulation-solution-products.htm Fri, 20 Mar 2020 00:00:00 +0530 https://www.p2power.co.in/active-harmonic-filter.htm https://www.p2power.co.in/active-harmonic-filter.htm Thu, 17 Jul 2025 00:00:00 +0530 Input voltage: single phase 220V to 240V AC. Frequency: 50 Hz or 60 Hz. Harmonic compensation range: up to 50th harmonic order. Rated current: varies by model, typically from 5 A to 100 A. Control method: digital signal processor (DSP) based real-time harmonic detection and filtering. Response time: milliseconds to microseconds. Power factor correction capability: improves power factor close to unity. Protection features include overcurrent, short circuit, overvoltage, and thermal protection. Cooling is typically forced air or natural convection. Mounting options include wall-mounted or panel-mounted. Operating temperature ranges from -10°C to +50°C. Humidity tolerance is up to 95% non-condensing. Communication protocols such as Modbus or Profibus may be supported for monitoring and control. Compliance adheres to IEC standards and relevant industry norms https://www.p2power.co.in/3-level-active-harmonic-filter.htm https://www.p2power.co.in/3-level-active-harmonic-filter.htm Thu, 17 Jul 2025 00:00:00 +0530 Input voltage: Three phase, typically 380V to 480V AC. Frequency: 50 Hz or 60 Hz. Harmonic compensation range: Up to 50th harmonic order. Rated current: Depends on model, ranging from 10 A to several hundred amperes. Control method: Digital signal processor (DSP) based real-time harmonic detection and filtering. Response time: Milliseconds to microseconds. Power factor correction capability: Improves power factor close to unity. Protection features: Overcurrent, short circuit, overvoltage, and thermal protection. Cooling: Forced air cooling with fans. Mounting: Floor or panel mounted. Operating temperature: -10°C to +50°C. Humidity: Up to 95% non-condensing. Communication: Optional communication protocols like Modbus, Profibus for monitoring and control. Compliance: IEC standards and relevant industry norms. https://www.p2power.co.in/multi-level-active-harmonic-filter.htm https://www.p2power.co.in/multi-level-active-harmonic-filter.htm Tue, 05 Feb 2019 00:00:00 +0530 Features Fast 32 bit digital signal processor Multi-Level converter architecture Direct Connection to 575V and 690V loads Synchronous Rotating Frame Principal for best performance Ultra fast compensation Proven performance on welding Harmonic Attenuation of >98% High Efficiency of >98% Selective Harmonic compensation Leading/Lagging Reactive Power Compensation Negative Sequence Compensation (load balancing) 15 possible Priority Selection settings for maximum flexibility Smart auto foldback to avoid over loading of filter 7" touch screen display Ethernet based remote monitoring MODBUS RTU, USB, SD Card Internal CAN Communication Closed Loop & Open Loop operation Paralleling of upto 32 filters for higher capacity Operator Activity Log >2,00,000 time stamped events can be logged in internal NAND memory   Benefits Compliance with prescribed harmonic limits - No penalty Unity Power Factor - higher savings Reduced energy (kVAh) charges - higher savings Reduced peak demand charges - higher savings Reduced fuel consumption in generators - higher savings Ultra fast compensation - effective with fast fluctuating load Optimum capacity utilization of electrical infrastructure Optimum capacity utilization of backup generators Improved voltage profile Reduced risk of transformer failure - higher uptime Reduced risk of equipment failure - higher uptime Increased operational reliability - higher uptime Compact footprint Indigenous design, low maintenance and prompt service https://www.p2power.co.in/hybrid-power-factor-correction-panel.htm https://www.p2power.co.in/hybrid-power-factor-correction-panel.htm Thu, 17 Jul 2025 00:00:00 +0530 Input voltage: Three phase 415 V AC. Power factor correction type: Hybrid (combination of passive and active correction). Components include capacitors, inductors, and power electronic devices. Rated current: Depends on panel size, typically from 10 A to several hundred amperes. Operating frequency: 50 Hz or 60 Hz. Control method: Automatic with microprocessor or PLC-based control. Protection features: Overcurrent, short circuit, and overload protection. Power factor improvement range: Typically from 0.7–0.95 up to 0.98 or higher. Mounting: Floor mounted or panel mounted. Cooling: Natural or forced ventilation. Operating temperature: -10°C to +50°C. Humidity: Up to 90% non-condensing. Standards compliance: IEC or relevant local standards. https://www.p2power.co.in/detuned-reactor.htm https://www.p2power.co.in/detuned-reactor.htm Tue, 05 Feb 2019 00:00:00 +0530 Features Special design for reduced heating Vacuum Impregnated Rugged design for harsh environments Thermal protection against over temperature Low Noise   Benefits Remove harmonic amplification Increase the life of capacitors Avoid harmonic resonance in the network Reduce cable and transformer losses Avoid over current during hard switching of capacitors https://www.p2power.co.in/dynamic-voltage-regulator.htm https://www.p2power.co.in/dynamic-voltage-regulator.htm Thu, 17 Jul 2025 00:00:00 +0530 Input voltage range typically 140V to 280V AC depending on the model. Output voltage is a stable regulated voltage, usually 220V with ±1-3% variation. Frequency supported is 50Hz or 60Hz. Regulation is automatic voltage regulation (AVR) using a servo motor or electronic control. Response time to voltage fluctuation is typically less than 0.1 seconds. Capacity or power rating ranges from 1 kVA to several hundred kVA. Cooling is done by natural air or forced air cooling with a fan. Protection features include overload protection, short circuit protection, under-voltage and over-voltage protection. Available in single phase and three phase versions. Efficiency generally exceeds 95%. Mounting options include floor standing or panel mounted. Control can be manual or digital display with monitoring options. Operating temperature ranges from -10°C to +50°C and humidity tolerance is up to 90% non-condensing. https://www.p2power.co.in/servo-stabilizer.htm https://www.p2power.co.in/servo-stabilizer.htm Thu, 17 Jul 2025 00:00:00 +0530 Input Voltage Range: 300V – 470V AC (Phase to Phase, customizable range) Output Voltage: 400V ± 1% (adjustable) Capacity Range: 5 KVA to 500 KVA (as per requirement) Phase Type: Three Phase, Four Wire System Stabilization Type: Servo Motor Controlled with Buck/Boost Transformer Correction Speed: 10–50 Volts per Second (varies by capacity) Frequency: 50Hz ± 5% Efficiency: ≥ 95% Cooling Type: Natural Air Cooled / Oil Cooled (based on capacity) Mounting: Floor Mounted (Indoor or Outdoor Cabinet options) Protection Features: Overload, Short Circuit, Over/Under Voltage, Phase Reversal Display: Digital Volt/Amp Meter, LED Indicators for Input/Output Status Control System: Microcontroller-Based Automatic Operation Applications: CNC Machines, Medical Equipment, Printing Press, Industrial Units, Commercial Complexes Warranty: 12–24 months standard Compliance: ISO / CE Certified, IS Standard Tested https://www.p2power.co.in/dc-charger.htm https://www.p2power.co.in/dc-charger.htm Tue, 09 Feb 2021 00:00:00 +0530 https://www.p2power.co.in/ac-charger.htm https://www.p2power.co.in/ac-charger.htm Tue, 09 Feb 2021 00:00:00 +0530 https://www.p2power.co.in/ev-infra-e-mobility-solutions.htm https://www.p2power.co.in/ev-infra-e-mobility-solutions.htm Thu, 02 Apr 2020 00:00:00 +0530 https://www.p2power.co.in/.htm https://www.p2power.co.in/.htm Thu, 18 Feb 2021 00:00:00 +0530 https://www.p2power.co.in/ac-type-2-charger.htm https://www.p2power.co.in/ac-type-2-charger.htm Sat, 26 Feb 2022 00:00:00 +0530 Model: Lite/ Basic/Ultra Input Power- 3.3kW, 7.2kW/11kW, 22kW Input Voltage- 230V AC single phase/415V AC 3 Phase Communication: Wifi, BT, RS485, LAN/4G/OCPP 1.6V https://www.p2power.co.in/thyristor-switching-module.htm https://www.p2power.co.in/thyristor-switching-module.htm Sat, 26 Feb 2022 00:00:00 +0530 It allows compensation of very high fluctuating reactive power demand. This system uses switching algorithm to toggle On/Off capacitor groups for required compensation with connection and disconnection of capacitor to and from the network at active zero potential crossing even in presence of harmonics.