- GST No. 09AAECP0915G2ZK
- Send SMS
- Send Email
| Business Type | Manufacturer, Exporter, Supplier |
| Download Product Brochure |  View |
Features
- Fast 32 bit digital signal processor
- Synchronous Rotating Frame Principal for best performance
- Ultra fast compensation
- Proven performance on welding
- Selective Harmonic compensation
- Step-less Reactive Power Compensation
- Negative Sequence Compensation (load balancing)
- Zero Sequence Compensation (neutral compensation)
- 15 possible Priority Selection settings for maximum flexibility
- Smart auto foldback to avoid over loading of filter
- 7" touch screen display
- Ethernet based remote monitoring
- MODBUS RTU, USB, SD Card
- Internal CAN Communication
- Closed Loop & Open Loop operation
- Operator Activity Log
- >1,00,000 time stamped events can be logged in internal NAND memory
Benefits
- Performance of Active with cost effectiveness of passive
- Compliance with prescribed harmonic limits - No penalty
- Unity Power Factor - higher savings
- Reduced energy (kVAh) charges - higher savings
- Reduced peak demand charges - higher savings
- Reduced fuel consumption in generators - higher savings
- Ultra fast compensation - effective with fast fluctuating load
- Proven performance on welding
- Optimum capacity utilization of electrical infrastructure
- Optimum capacity utilization of backup generators
- Improved voltage profile
- Reduced risk of transformer failure - higher uptime
- Reduced risk of equipment failure - higher uptime
- Increased operational reliability - higher uptime
- Compact footprint
- Indigenous design, low maintenance and prompt service
Technical Specifications
| Models | p2p-415-hypfc3 | p2p-415-hypfc4 | |
| Network Voltage | 415Urms +10%/-15% | ||
| Connection | 3P/4W | 4P/4W | |
| Grid Frequency | 50Hz +/-5% (60Hz available on request) | ||
| Reactive Lag Compensation | Full | ||
| Reactive Lead Compensation | Limited | ||
| Harmonic Compensation | Limited | ||
| Harmonic Filtering | 2nd - 25th order | ||
| Individual Harmonic Selection | Yes | ||
| Negative Sequence Compensation | Limited | ||
| Zero Sequence Compensation | NA | Yes (Limited) | |
| Compensation | Closed Loop | ||
| Reaction Time | <150 micro seconds | ||
| Filter Consumption | <2.0% of rated capacity (typical) | ||
| CT Specifications | ratio based on peak load | 0.5 class or better | 15VA or more | ||
| Standards | IEEE 519-1992 harmonic standards | ||
| USER INTERFACE | |||
| Interface | 7" touch screen | ||
| Remote Interface | Ethernet, MODBUS RTU | ||
| Configuration Settings | Through user interface & USB key | ||
| ENVIRONMENT | |||
| Protection Class | IP41 (Higher on request) | ||
| Operating Temperature | upto 45 degrees with adequate ventilation (upto 55 degrees with derating) | ||
| Operating Environment | Indoor, Dust Free | ||
| Relative Humidity | Maximum 95% (non condensing) | ||
| Altitude | Upto 1000m | ||
Looking for "Hybrid Power Factor Correction Panel" ?
Piece
