Power Quality Solutions Products

Features

• Special design for reduced heating
• Vacuum Impregnated
• Rugged design for harsh environments
• Thermal protection against over temperature
• Low Noise

Benefits

• Remove harmonic amplification
• Increase the life of capacitors
• Avoid harmonic resonance in the network
• Reduce cable and transformer losses
• Avoid over current during hard switching of capacitors

Features

• Fast 32 bit digital signal processor
• Multi-Level converter architecture
• Direct Connection to 575V and 690V loads
• Synchronous Rotating Frame Principal for best performance
• Ultra fast compensation
• Proven performance on welding
• Harmonic Attenuation of >98%
• High Efficiency of >98%
• Selective Harmonic compensation
• Leading/Lagging Reactive Power Compensation
• Negative Sequence Compensation (load balancing)
• 15 possible Priority Selection settings for maximum flexibility
• Smart auto foldback to avoid over loading of filter
• 7" touch screen display
• Ethernet based remote monitoring
• MODBUS RTU, USB, SD Card
• Internal CAN Communication
• Closed Loop & Open Loop operation
• Paralleling of upto 32 filters for higher capacity
• Operator Activity Log
• >2,00,000 time stamped events can be logged in internal NAND memory

Benefits

• Compliance with prescribed harmonic limits - No penalty
• Unity Power Factor - higher savings
• Reduced energy (kVAh) charges - higher savings
• Reduced peak demand charges - higher savings
• Reduced fuel consumption in generators - higher savings
• Ultra fast compensation - effective with fast fluctuating load
• Optimum capacity utilization of electrical infrastructure
• Optimum capacity utilization of backup generators
• Improved voltage profile
• Reduced risk of transformer failure - higher uptime
• Reduced risk of equipment failure - higher uptime
• Increased operational reliability - higher uptime
• Compact footprint
• Indigenous design, low maintenance and prompt service

Input voltage: single phase 220V to 240V AC. Frequency: 50 Hz or 60 Hz. Harmonic compensation range: up to 50th harmonic order. Rated current: varies by model, typically from 5 A to 100 A. Control method: digital signal processor (DSP) based real-time harmonic detection and filtering. Response time: milliseconds to microseconds. Power factor correction capability: improves power factor close to unity. Protection features include overcurrent, short circuit, overvoltage, and thermal protection. Cooling is typically forced air or natural convection. Mounting options include wall-mounted or panel-mounted. Operating temperature ranges from -10°C to +50°C. Humidity tolerance is up to 95% non-condensing. Communication protocols such as Modbus or Profibus may be supported for monitoring and control. Compliance adheres to IEC standards and relevant industry norms

Input voltage: Three phase 415 V AC. Power factor correction type: Hybrid (combination of passive and active correction). Components include capacitors, inductors, and power electronic devices. Rated current: Depends on panel size, typically from 10 A to several hundred amperes. Operating frequency: 50 Hz or 60 Hz. Control method: Automatic with microprocessor or PLC-based control. Protection features: Overcurrent, short circuit, and overload protection. Power factor improvement range: Typically from 0.7–0.95 up to 0.98 or higher. Mounting: Floor mounted or panel mounted. Cooling: Natural or forced ventilation. Operating temperature: -10°C to +50°C. Humidity: Up to 90% non-condensing. Standards compliance: IEC or relevant local standards.

Input voltage: Three phase, typically 380V to 480V AC. Frequency: 50 Hz or 60 Hz. Harmonic compensation range: Up to 50th harmonic order. Rated current: Depends on model, ranging from 10 A to several hundred amperes. Control method: Digital signal processor (DSP) based real-time harmonic detection and filtering. Response time: Milliseconds to microseconds. Power factor correction capability: Improves power factor close to unity. Protection features: Overcurrent, short circuit, overvoltage, and thermal protection. Cooling: Forced air cooling with fans. Mounting: Floor or panel mounted. Operating temperature: -10°C to +50°C. Humidity: Up to 95% non-condensing. Communication: Optional communication protocols like Modbus, Profibus for monitoring and control. Compliance: IEC standards and relevant industry norms.

It allows compensation of very high fluctuating reactive power demand. This system uses switching algorithm to toggle On/Off capacitor groups for required compensation with connection and disconnection of capacitor to and from the network at active zero potential crossing even in presence of harmonics.